Portable Small Three Phase Mobile 6.5kW Standby Outdoor Diesel Engine Power Generator

Vertical Single Cylinder Easy Maintain Air Cooled 6kW Diesel Generator

Features

1. Strong power, all ring power diesel generators are equipped with a strong self-developed four stroke engine automatic pressure reducing mechanism to ensure fast start.

2. Low noise, efficient combustion system to ensure complete combustion, effectively reduce the noise of the engine. In addition, the noise of the unit is greatly reduced by the double-layer noise reduction structure of the integrated shell and the inner lining of silent unit and the large-scale attenuator device.

3. The low oil pressure alarm device will automatically shut down the motor set when the oil pressure drops to the safety warning line, and can not start normally until the oil is replenished, so as to avoid damage to the unit.

4. The new automatic voltage regulator (AVR) can reduce the voltage fluctuation to a lower limit and ensure a more stable unit output.

5. Overload protection capacity: when the unit is over 110% overload, the unit will automatically protect the unit from overload damage.(optional)

6. All control units are centralized on the intelligent control panel, and users can know the real-time operation conditions of the unit, so that the users have no worries.(optional)

7. Humanized design and appearance improvement of Huanneng power generator set inject more humanized design ideas. Most models are equipped with casters, which is convenient for unit movement.

Working Principle

In short, the diesel generator drives the generator to run.

In the cylinder, the clean air filtered by the air filter is fully mixed with the high-pressure atomised diesel fuel injected by the injector. Under the upward squeezing action of the piston, the volume contracts and the temperature rises rapidly to the ignition point of the diesel fuel. Diesel fuel is ignited, the mixture of gases burning violently, the volume of rapid expansion, the piston is pushed down, called "work". Each cylinder does its work in a certain order and the thrust on the piston is transformed by the connecting rod into a force that pushes the crankshaft to rotate. By installing the brushless synchronous alternator coaxially with the crankshaft of the diesel generator, the rotor of the generator can be driven by the rotation of the diesel generator. Using the principle of "electromagnetic induction", the generator outputs an induced electric potential, which closes the load circuit to produce current.